News

F12 height adjust on stock springs

Discussion in 'FF/Lusso/F12/812S' started by Phillychoi, May 23, 2020.

  1. Phillychoi

    Phillychoi Rookie
    Silver Subscribed

    Apr 4, 2020
    48
    Hey guys,

    How can I adjust height on stock springs? I heard it can be done. I want to lower a little bit. Is it similar to coilover adjustment? Stock springs on the adjustable perches like coilovers.

    Thanks in advance.
     
  2. To remove this ad click here.

  3. Doc_Dent

    Doc_Dent Karting

    Mar 2, 2015
    215
    It can be done I guess -if I correctly understand UR question-.
    But may I ask Y would U want to do it in the first place?
    I mean the car is low already (with lifting kit off obviously:)).
    Don't 4get the car has a very powerful engine, and with all the aerodynamic stuff going on with the body, playing with height is not a great idea in my opinion.
    Plus, I guess doing so would void guarantees on the car in case of any future problems.
    I would highly recommend to think twice b4 deciding to get UR self into SMTH like that.
    TC...
     
    Phillychoi likes this.
  4. Romaihi

    Romaihi Rookie

    Apr 26, 2020
    29
    Qatar
    Full Name:
    Hamad Al Romaihi
    I would recommend installing Novitec springs

    Rather than cutting OEM springs.

    I heard some installing TDF springs as well.


    Sent from my iPhone using FerrariChat.com mobile app
     
    Phillychoi likes this.
  5. Gh21631

    Gh21631 F1 Veteran
    Silver Subscribed

    Feb 24, 2011
    6,248
    East
    I lowered mine on stock springs but if you have a lift you are limited on the adjustment. This is as far as you can go but it was enough for me.
    Image Unavailable, Please Login
     
    JPSMD and Phillychoi like this.
  6. Phillychoi

    Phillychoi Rookie
    Silver Subscribed

    Apr 4, 2020
    48
    The reason why I want to lower is that I just got 21/22" wheel set up and the fender gap seems more due to a lower profile tires. I don't want to slam with lowering springs just minor drop is all I want.
     
  7. To remove this ad click here.

  8. Phillychoi

    Phillychoi Rookie
    Silver Subscribed

    Apr 4, 2020
    48
    Like I said above I don't want too low with Novitec springs. I just want to reduce the fender gap a little bit.
     
  9. Phillychoi

    Phillychoi Rookie
    Silver Subscribed

    Apr 4, 2020
    48
    That looks great. How much lower is that? I would be fine with that height. I don't have a lift system.

    Thanks for the pic!
     
  10. Gh21631

    Gh21631 F1 Veteran
    Silver Subscribed

    Feb 24, 2011
    6,248
    East
    I dont recall the exact adjustment but I want to say about 1/2" in the front and the rear to balance it out.
     
    Phillychoi likes this.
  11. Phillychoi

    Phillychoi Rookie
    Silver Subscribed

    Apr 4, 2020
    48
    Ok thanks. Did you do alignment after that?
     
  12. To remove this ad click here.

  13. Gh21631

    Gh21631 F1 Veteran
    Silver Subscribed

    Feb 24, 2011
    6,248
    East
    Yes, thats highly recommended.
     
    Phillychoi likes this.

Share This Page