Foam flecks from 328 heater vents | FerrariChat
Buy

Foam flecks from 328 heater vents

Discussion in '308/328' started by GrigioGuy, Jan 25, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. GrigioGuy

    GrigioGuy Splenda Daddy
    Lifetime Rossa Owner

    Nov 26, 2001
    33,047
    E ' ' '/ F
    Full Name:
    Ayagoa Kabooma
    #1 GrigioGuy, Jan 25, 2006
    My vents are spitting small annoying chucks of debris. I figure it's the foam in the system that's deteriorated. Anyone ever replaced this? Any gotchas in the process?
     
  2. MARQ

    MARQ Formula 3

    Feb 9, 2002
    1,924
    East Coast US
    Full Name:
    Marq
    #2 MARQ, Jan 25, 2006
    Yep, I think Carl Rose did one of his fantastic write-ups on this, including pics, some time back. Not a big deal, easy to do. Might have been on the old FChat. My foam had disintegrated to dust.
    If it wasn't Carl, I apologize to the writer of said article. An easily followed procedure; even I was able to do it.
     
  3. Kingpin328

    Kingpin328 Formula Junior

    Nov 7, 2003
    433
    #3 Kingpin328, Jan 25, 2006
    Last edited by a moderator: Sep 7, 2017
    Could it be the foam in the heater box? If I remember correct, the front 'lid' with duct-hose pulls off without anything to unscrew.
    Image Unavailable, Please Login
     
  4. MARQ

    MARQ Formula 3

    Feb 9, 2002
    1,924
    East Coast US
    Full Name:
    Marq
    #4 MARQ, Jan 25, 2006
    Yes, most definitely. Replace the foam in those boxes and you're good to go.
     
  5. GrigioGuy

    GrigioGuy Splenda Daddy
    Lifetime Rossa Owner

    Nov 26, 2001
    33,047
    E ' ' '/ F
    Full Name:
    Ayagoa Kabooma
    #5 GrigioGuy, Jan 25, 2006
    Gracias!
     
  6. Kingpin328

    Kingpin328 Formula Junior

    Nov 7, 2003
    433
    #6 Kingpin328, Jan 25, 2006
    De nada! (LOL, my spanish sucks)
     
  7. Easyrider7467

    Easyrider7467 Formula Junior

    Nov 3, 2005
    980
    Northen N.J.
    Full Name:
    John
    #7 Easyrider7467, Jan 25, 2006
    Tillman,
    Can I suggest adding this to your "328 Primer". Sincerely, J.
     
  8. tvu

    tvu Formula 3
    Silver Subscribed

    Apr 13, 2004
    1,360
    Southern California
    Full Name:
    Trieu
    #8 tvu, Jan 25, 2006
    Thanks for question. I always wondered about those dust specs.
     
  9. carlrose

    carlrose Formula Junior

    Nov 25, 2003
    324
    #9 carlrose, Jan 25, 2006
    Nope, it was me, guilty as charged! (smile)

    I still have, goodness, 10 feet of the foam roll left in the basement. Anyone need a few pieces cut? Interestingly, the original is *not* a rectangle, but more of a "T". Let me know if you'd like some sent out.

    :) Carl
    [email protected]
     

Share This Page