Help on buying a weber DCNF | FerrariChat
Buy

Help on buying a weber DCNF

Discussion in 'Technical Q&A' started by Countachqv, Mar 16, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Countachqv

    Countachqv Formula 3

    Apr 25, 2007
    2,350
    USA/France
    #1 Countachqv, Mar 16, 2008
    I have found 2 44 DCNF carburetors in good shape with the short velocity stacks. I am not sure what I should pay as a fair price. Could anyone help figure this out? I figured $500 for both toghether.
     
  2. dm_n_stuff

    dm_n_stuff Four Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2003
    43,706
    26.806311,-81.755805
    Full Name:
    Dave M.
    #2 dm_n_stuff, Mar 16, 2008
    I'd buy 'em for that if you can get 'em. They look to me, from the couple places I looked, to be worth close to that each (retail used) if they're in running condition.

    DM
     
  3. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    13,529
    San Carlos, CA
    Full Name:
    Mitchell Le
    #3 yelcab, Mar 16, 2008
    In excellent shape, for a matched set of 4, $2000 minimum. Buying 2 now does not guarrantee that you can get another 2 with matching linkages, stacks, jets, and state of tune.
     
  4. dm_n_stuff

    dm_n_stuff Four Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2003
    43,706
    26.806311,-81.755805
    Full Name:
    Dave M.
    #4 dm_n_stuff, Mar 16, 2008
    But wouldn't you agree that they are not that easy to find, and you'd grab 'em, even if it's only half of what you need?

    Can't linkages, jets, etc be purchased from Pierce Manifolds, or Weber.com?
     
  5. Countachqv

    Countachqv Formula 3

    Apr 25, 2007
    2,350
    USA/France
    #5 Countachqv, Mar 16, 2008
    I am confused about matching. jets I can find anywhere for cheap. Linkage not sure if this has to do with the carb or the car itself. I am buying the carb and horn, will replace jets and seals, bowls and will have them tuned for the car. Is the linkage rather a part specific to the car or is it more to this on the carb itself? I am mostly looking for the bodies and horn for replacements.
     
  6. miketuason

    miketuason F1 World Champ
    Owner Silver Subscribed

    Feb 24, 2006
    15,804
    Cerritos, CA.
    Full Name:
    Mike
    #6 miketuason, Mar 16, 2008
    Don't pay more than $200 for each as they are only less than $400 each new.

    Don't worry about the jettings either, you can get any jets at any size new at

    Pierce Manifold. Talk to Mike http://www.piercemanifolds.com/
     

Share This Page