How to.....change the dash lights to LED's

1. Pop out the horn button AND bezel with your fingernails or a thin knife or screwdriver, undo the connector to the horn, careful to NOT touch the horn wire to the steering column or wheel, it will HONK !

Image Unavailable, Please Login

2. Remove the 6 flat allen screws, remove the steering wheel.

Image Unavailable, Please Login

3. Remove the small black knurled knobs for the 2 large gages.

Image Unavailable, Please Login

4. Look for the large connector and separate the gage from the wiring harness, it will be easier to work on it separately, then find the black & yellow wires to the bulbs and swap the led lamps in. Repeat for both large gages.

Image Unavailable, Please Login

5. Remove the phillips head screws and GENTLY pull out the trim with the 2 small gages, there is also a connector for them which you can pull apart and then swap the bulbs.

Image Unavailable, Please Login

6. I used BA9S-W4-90-12VAC/DC bulbs from superbrightleds.com (no affiliation) $2.00 ea, and while you have the connectors apart, a small dab of dielectric grease will help keep the juice flowing !

Image Unavailable, Please Login

Image Unavailable, Please Login

7. An easy fix for a DIM problem !

Gary