News

lift 308

Discussion in 'Technical Q&A' started by adesalos, Dec 12, 2003.

  1. adesalos

    adesalos Karting

    Mar 19, 2003
    222
    Texas
    Following one of my previous thread, I would like to know what are the points to use to lift the back and the front of a 308, and where to place the stands.
    Apparently (Verell's comment) if you do it at the wrong place you can bend the chassis.
    Pics appreciated!
     
  2. pma1010

    pma1010 F1 Rookie
    Silver Subscribed

    Jul 21, 2002
    2,556
    Chicago
    Full Name:
    Philip
    I usually start to jack mine using the oval section frame rails, about level with the a-arms and then support with the stand at about the junction of the Y in the chassis. At the front I raise behind the wheel on the frame rail Y section joint and put the stand on the I section frame rails at the mid section of the front a-arm or thereabouts.
    HTH
    Philip
     

Share This Page