348 - Lower Shock Mount and Stabilizer Bar End Link Bushings | FerrariChat

348 Lower Shock Mount and Stabilizer Bar End Link Bushings

Discussion in '348/355' started by Jasonberkeley, Nov 30, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Jasonberkeley

    Jasonberkeley Formula 3

    Apr 23, 2017
    1,321
    NW Corner, CT
    Full Name:
    Jason Berkeley
    #1 Jasonberkeley, Nov 30, 2019
    Hi all- my lower shock mount bushings and stabilizer bar end-link bushings have begun to crack and I would like to replace with something that looks OEM but is more durable / higher performance.

    Does anyone have any suggestions with items they have experience with? (I did a search and couldnt find much on this).

    Also, any tricks / difficulties with removing and replacing these items?

    See pics of my current state of affairs below.
    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

    Thanks!

    Jason
     
  2. Ferrarium

    Ferrarium F1 Veteran
    Rossa Subscribed

    Jul 28, 2018
    5,631
    Central NJ
    Full Name:
    Eric
    #2 Ferrarium, Nov 30, 2019
    I replaced all mine but they did not look that that. I also did tie rod and control arm bushes you're probably due there too. I did not do my control arm bushes but I bought them but I did everything else.

    http://www.superformance.co.uk/348/suspension.html

    While your at it check your steering rack bushing, grab the front pas anger wheel and see of it wiggles.
     

Share This Page