Mondial lighting problem | FerrariChat

Mondial lighting problem

Discussion in 'Technical Q&A' started by R D Williams, May 23, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. R D Williams

    R D Williams Rookie

    Jun 24, 2004
    2
    Does anyone have a wiring diagram for a 1984 Mondial. I lost the fogs, dash, running light. I don't seem to be getting any power through the fuse. Nothing to the fog light switch or to the board for the dash lights.
     
  2. surfdoc37

    surfdoc37 Karting

    Nov 19, 2004
    124
    St. Louis, MO
    Full Name:
    Mark M.
    Same request, even more severe symptoms, i.e. nothing electrical seems to work on the whole darn car after sitting overnight. Anyone with a Mondial QV wiring diagram willing to share?
     
  3. jh355

    jh355 Formula Junior

    Feb 12, 2004
    424
    Halluci-Nation
    Full Name:
    Craven Morehead
    I have an 83 and would be happy to share, but not sure how to host or post a link, if you PM me, and send your email address, I’ll send it along in PDF file format.
     
  4. dakharris

    dakharris Two Time F1 World Champ

    Jun 7, 2001
    29,441
    Sleepy Hollow
    Full Name:
    Cavaliere Senzatesta
    A wiring diagram may not help you. Just check all of the connections. Start with the main ones and work your way back to the fuse block. Since nothing works, it could be as simple as a bad ground wire. Zertec has built a replacement fuse block that, after postitive testing is concluded, I would strongly recommend. You probably have a corroded connection somewhere. You could also have a burnt out relay. Worse case scenario is a short in the circuit board. You can take it apart and you will see right away if it has burned through.
     
  5. lusso64

    lusso64 Formula 3

    Apr 12, 2004
    1,535
    Simi Valley
    Full Name:
    David
    If it's the fuse box, it can be repaired quite cheaply.

    If you want an electrical diagram, I can email it - just send me your email address in a PM.

    Dave
     

Share This Page