Out side temp Sensor | Page 2 | FerrariChat

Out side temp Sensor

Discussion in '348/355' started by Senna_94, Nov 27, 2017.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. johnk...

    johnk... F1 World Champ
    Owner

    Jun 11, 2004
    10,667
    CT
    Full Name:
    John Kreskovsky
    I think this is just a case of Ferrari not updating things. If you look at the parts diagrams on Ricambi it is obvious that the diagram for the 355 is the same as that for the 348. But in reality the cars are different. I don't know about earlier 95s as my car is June 95 production.
     
  2. taz355

    taz355 F1 Veteran
    Owner Silver Subscribed

    Feb 18, 2008
    5,969
    Indio Ca/ Alberta
    Full Name:
    Grant
    Too back up John I did not see in person so until physical confirmation I agree. I spoke as if I was possitive and I am but the info I saw could have been wrong as it was a post online and the 355 was being discussed at the time.
    That being said I should not have stated it as fact.
    I believe it was an euro car on a euro site so maybe someone with a early 94 could confirm here.
     
  3. johnk...

    johnk... F1 World Champ
    Owner

    Jun 11, 2004
    10,667
    CT
    Full Name:
    John Kreskovsky
    #28 johnk..., Nov 30, 2017
    Last edited: Nov 30, 2017
    If you look at the parts diagrams for the 348 (any year) and 355 (any year) you will see that the 348 and 355 mirrors are different and only the 355 LH mirror shows the outside air temp sensor and part number for such.
     

Share This Page