News

Paddle shifter not engaged issue fix

Discussion in 'Technical Q&A' started by Mike8Wang, Jun 9, 2019.

  1. Mike8Wang

    Mike8Wang Rookie

    Feb 12, 2019
    6
    orlando,fl
    Full Name:
    Mike Wang
    #1 Mike8Wang, Jun 9, 2019
    Last edited: Jun 9, 2019
    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Had a problem where I can't down shift and therefore not able to put gear into neutral for my california T. But I was able to shut off engine with gear in 1. After some searching and can't find any fix, I was worried it's gonna be a expensive fix. Luckily, I look around under the paddle shifter and saw the loose plastic trigger and found the problem. The piece around the pin had broke in half and I was able to glue back together. Hopefully it stays together to avoid ordering a replacement part.

    I did noticed if I shut off with gear in 1, with break engaged, I was able to pull the key without waiting. Normally there's few seconds of wait to get the keys out if I shut off in neutral.
     
    Qavion likes this.

Share This Page