News

Quick Help Needed!

Discussion in 'Ferrari Discussion (not model specific)' started by LuigiVee, Mar 13, 2009.

  1. LuigiVee

    LuigiVee Formula Junior

    Jan 1, 2007
    280
    Newport Beach, CA
    Full Name:
    Lou Volpini
    I've just removed the distributor cap on my '78 308. Now, how the heck do I remove the wires (specifically the coil wire) from the cap. Sorry for the stupid rookie question, but I'm in the garage now trying to figure it out as I plan to replace all my wires tonight! Thanks!
     
  2. To remove this ad click here.

  3. tatcat

    tatcat F1 Veteran
    Silver Subscribed Owner

    Sep 3, 2001
    8,501
    panama city beach FL
    Full Name:
    rick c
    there are little screws holding the wires in. do a few searches as there are several good threads with pics on replacing ignition wires.
     
  4. jonesdds

    jonesdds Formula 3

    Aug 31, 2006
    2,160
    SB,CA & Park City UT
    Full Name:
    Jeff
    Probably best in the tech section or the 308/328 section, not here. good luck

    Jeff
     
  5. LuigiVee

    LuigiVee Formula Junior

    Jan 1, 2007
    280
    Newport Beach, CA
    Full Name:
    Lou Volpini
    Thanks, posted there. I'll attemp to ditch this thread!
     

Share This Page