News

Replacing a 348 tail light

Discussion in 'Technical Q&A' started by JSL, Mar 2, 2004.

  1. JSL

    JSL Formula 3

    Jan 5, 2002
    2,212
    California
    Full Name:
    J.S. Leonard
    Can someone tell me how to (or have pictures) remove and replace the rear tail light assembly in a 348ts. Mine is cracked and I have bought a new one to replace it. I just want to make sure I do it right and not waste too much time doing it.
    Thanks,
    Scott
     
  2. To remove this ad click here.

  3. ernie

    ernie Two Time F1 World Champ
    Lifetime Rossa Owner

    Nov 19, 2001
    22,035
    The Brickyard
    Full Name:
    The Bad Guy
    Hey J. Scott

    It is way easy to take the rear tail lights out. Here's what you do:

    1) Remove the four screws (two on either side), and the center bolt, holding the rear grill in place, and remove grill

    2) on the inside of the engine bay, unscrew the two plastic screws holding the cover onto the back of the tail light assembly, and remove cover. The screws on the cover can be turned by hand

    3) unplug the lights

    4) remove remaining screws, and the remove tail light assembly

    It isn't hard, and should take you about 15-20 minutes to get the tail lights out. Have fun.
     
  4. JSL

    JSL Formula 3

    Jan 5, 2002
    2,212
    California
    Full Name:
    J.S. Leonard
     
  5. parkerfe

    parkerfe F1 World Champ

    Sep 4, 2001
    12,887
    Cumming, Georgia
    Full Name:
    Franklin E. Parker
    How much does a 348 tail light cost ? It may be worth looking in to using the round tail light kit fror the 348 sold at www.GaRedCars.com
     

Share This Page