SESALIT PLUS G GASKETS | FerrariChat

SESALIT PLUS G GASKETS

Discussion in 'Technical Q&A' started by absostone, May 9, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. absostone

    absostone F1 Veteran
    Silver Subscribed

    Jul 28, 2008
    9,281
    #1 absostone, May 9, 2018
  2. Ferraripilot

    Ferraripilot F1 World Champ
    Owner Project Master

    May 10, 2006
    17,189
    Atlanta
    Full Name:
    John!
    #2 Ferraripilot, May 9, 2018
    Yeah. They're fine, pretty much the same material as Klingersil. If using on an oil pain I like to coat both sides with a bit of Loctite 515, looks and smells like grape jelly.
     
  3. absostone

    absostone F1 Veteran
    Silver Subscribed

    Jul 28, 2008
    9,281
    #3 absostone, May 9, 2018
    Yup thank you. I use the same stuff. The other two times I used the Klingersil. So I was surprised when I received these. Thank you for the reply
     
  4. Ricambi America

    Ricambi America F1 World Champ
    Sponsor Owner

    Dec 7, 2003
    16,251
    Winston Salem, NC
    #4 Ricambi America, May 9, 2018
    That is the paper used on nearly all new-production OEM gaskets.
     
  5. absostone

    absostone F1 Veteran
    Silver Subscribed

    Jul 28, 2008
    9,281
    #5 absostone, May 9, 2018
    Thx Daniel. It's good to know from the forum before I use them. Thx
     
  6. absostone

    absostone F1 Veteran
    Silver Subscribed

    Jul 28, 2008
    9,281
    #6 absostone, May 9, 2018
    I don't have a Klingersil to compare to but theese seem a little thinner
     

Share This Page