Sticky 360 defroster outlet plate removal | FerrariChat

Sticky 360 defroster outlet plate removal

Discussion in '360/430' started by PGI, Jul 10, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. PGI

    PGI Karting

    Oct 24, 2017
    52
    Full Name:
    Ken
    #1 PGI, Jul 10, 2018
    How do I remove the small outlet plates on my 360? Not the outlets at the base of the windshield. The two small outlets on either side of the dashboard. Thanks.
     
  2. Ghostdiver

    Ghostdiver Formula 3
    Silver Subscribed

    Mar 18, 2005
    1,326
    Southeast Texas
    Full Name:
    Wally Hollar
    #2 Ghostdiver, Jul 10, 2018
    Small prybar is how I did it....plastic is preferable. Couldn't tell from your profile where you are at but most autoparts stores have a small prybar set for interior panels and one of those will work perfectly. Last resort....small flat screwdriver and lay something down on the leather in front of the vent for added security.
     
    02360spider and 285ferrari like this.

Share This Page