458 Suspension Lifter Bleeding method?

Discussion in '458 Italia/488/F8' started by Smiley, Mar 27, 2020.

  1. Smiley

    Smiley Rookie

    Dec 1, 2015

    I wonder if anyone has a DIY way of bleeding the front suspension lifter system? ( after having been disconnected when shock absorber was removed ) ?
    In the workshop manual, it states to bleed the hydraulic lifter system a DEIS Diagnostic tester is required, and to select "NSV Bleeding" on that diagnostic tool. this is obviously the Ferrari specific tool that costs an absolute fortune!

    Was going to change the springs, but don't want to run into drama not being able to bleed the lifter system afterwards!

    Thanks Miles
  2. To remove this ad click here.

Share This Page