Using original lug bolts with repro wheels on 308's | FerrariChat

Using original lug bolts with repro wheels on 308's

Discussion in 'Technical Q&A' started by JamesH, Nov 28, 2003.

  1. JamesH

    JamesH Formula Junior

    May 11, 2001
    San Carlos, Californ
    Full Name:
    James Hom
    Does anyone know if you can use the original lug bolts on the reproduction 16" wheels for a 79 308 GTB.
  2. To remove this ad click here.

  3. bill308

    bill308 Formula 3
    Silver Subscribed

    May 13, 2001
    Windsor, CT
    Full Name:
    Bill Sebestyen
    I had to shorten the rear lug bolts about 1/8 inch to keep them from contacting the rear hubs. The front lug bolts were used on the front wheels without modification.
  4. Trinacria

    Trinacria Formula Junior

    Aug 7, 2002
    Long Island, NY
    Full Name:
    Baldassare Guzzo
    On my 81 they were fine.
  5. Dave

    Dave F1 Rookie

    Apr 15, 2001
    Little Rock
    Full Name:
    David Jones
    I would think it would depend on if you started with the original 14's that were the same width at all four corners...
    And if you were going to the later style QV wheels that were wider in the rear.

Share This Page