Which Ferrari models utilize the CAN BUS system? | FerrariChat

Which Ferrari models utilize the CAN BUS system?

Discussion in 'Ferrari Discussion (not model specific)' started by AlpenJäger1914, Jun 25, 2021.

Tags:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. AlpenJäger1914

    AlpenJäger1914 Rookie

    Jan 15, 2021
    19
    #1 AlpenJäger1914, Jun 25, 2021
    I was wondering if any of the Ferrari models utilize this CAN BUS system and if so, with which model did it start?
     
  2. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,578
    Sydney
    Full Name:
    Ian Riddell
    #2 Qavion, Jul 2, 2021
    It possibly started with the 355F1 for communications between the F1 TCU and engine Motronic ECU (The wiring diagrams show a 120 ohm resistor in that wiring). Or perhaps the 550 which used a bus between the two Motronic ECUs. The 360 had at least one CAN Bus, the 430, at least two. Not sure about the 575. I think from then on, all of them used them.
     
    AlpenJäger1914 likes this.
  3. Ray Smith

    Ray Smith Formula Junior
    Silver Subscribed

    May 17, 2020
    851
    Costa Mesa, CA
    Full Name:
    Raymond Smith
    #3 Ray Smith, Jul 3, 2021
    I have the CAN-BUS on my 430. Stefvan of Scud Ing probably knows because he makes CAN-BUS adapters.
     
    AlpenJäger1914 likes this.

Share This Page