| Author |
Message |
Joel Ames (James)
Junior Member
Username: James
Post Number: 62
Registered: 4-2001
| | Posted on Wednesday, June 25, 2003 - 12:25 pm: | |
Thanks Peter, Now I know how to do it. |
'75 308 GT4 (Peter)
Advanced Member
Username: Peter
Post Number: 2880
Registered: 12-2000
| | Posted on Tuesday, June 24, 2003 - 2:07 pm: | |
Some were successful just pulling it with everything in place. Since I had the tanks out to refinish them, I removed the aluminum firewall panels and unclipped the hoses and pulled it straight out. The real b---- is up at the front wheelwell, you must remove the little access panel so you can route the hose around a sharp bend. Otherwise, its next to impossible.
Posts from the archives:
http://www.ferrarichat.com/discus/messages/256120/8855.html
http://www.ferrarichat.com/discus/messages/256120/1092.html
http://www.ferrarichat.com/discus/messages/256120/162134.html
http://www.ferrarichat.com/discus/messages/256120/159819.html
etc... |
Joel Ames (James)
Junior Member
Username: James
Post Number: 61
Registered: 4-2001
| | Posted on Tuesday, June 24, 2003 - 12:13 pm: | |
Im trying to replace the heater hose in my 78 308 that runs from the plentum then through the cavity under the drivers door. It wont pull out. Do I have to remove the gas tank to unclip it or something? This small project is turning into a major pain. Has to be done though, 25 yr old hoses. thanks |